Home > Non-Destructive Testing > Vacuum Boxes > Flat Bottom >
Availability: In Stock
Usually ships In 1-2 Business Days
- Model: 30FB
- Flat bottom box for testing butt welds on flat surfaces
- Operates using compressed air
- Outside Dimensions: 30"L x 7 "W x 1 5/8"H
Viewing Area: 26 7/8"L x 4 "W
VACUUM DEVICES FOR LEAK TESTING - DEPENDABLE PERFORMANCE
TSP vacuum device designs have been thoroughly field tested for several years in a variety of applications throughout the world.
SIMPLE TO OPERATE
The air ejector has no moving parts. After applying leak detection fluid along seam, simply place the vacuum device over the area to be tested and open the air valve. Slight pressure may be required to seal the box.
RUGGED YET LIGHTWEIGHT
Our shockproof vacuum devices are built with lightweight acrylic which can be fabricated for special applications. The tough rubber gasket is designed to provide a maximum seal.
Each box is shipped with the hardware to immediately begin testing when connected to an air source. A 2oz sample of SEAMTEST is provided in the kit. In stock for immediate delivery. All vacuum gauge dials read 0-30” Hg.
Leak Testing Fluid:
A low cost fluid for leak testing tanks, cylinders and bulk-heads at 5 to 10 lbs of air pressure. It detects smaller leaks than found with any other fluid and leaves no greasy or fatty acid residue.
To use, thoroughly mix 4 oz. of leak test concentrate with 5 gallons of water. Brush or pour on seams and watch for bubbles.